Item Description

Substantial good quality breeder farm feeder trough chain and consuming system

—Breeder Method

Merchandise Description

Part-one
Breeder Woman Feeding Line
incorporate 2 product:
1) Breeder  pan feeding for femal involves Travel Motor, Feed Trough, Chain/auger,  Femal Feeder Pan, Hopper, Suspension method and other needed elements.
2) Breeder chain feeding for femal includes Drive Motor, Feed Trough, Chain,  Hopper, Corner and other required components.

three) Auger pan feeding program for male, it includes feed pipe, auger, motor, hopper, suspension method and other essential areas.

Hello-hope choose the most steady and good quality generate motor to guarantee the total line steady and productive working automatically. And the chain is from the world leading chain supplier Specialized Program. Feeder could be used from day one particular, and feeder created with the maximum feed bearing ability to offer much more birds, fulfill distinct growing phase of feminine. The entire line layout goal to get the very best FCR.
 

 

Part-two
Feed Storage and Feed Fill Method
incorporate the feed silo, versatile feed shipping auger, PVC feed delivery pipe, travel motor and other necessary areas. It’s benifit with easy, substantial quality and effectiveness.
 

Feed Fill Method 75mm 90mm
Max Delivery Length 60m 40m
Equipment Motor one.1HP/1.5HP,50/60HZ, 1 Section/3 PHASES 1.1HP/1.5HP,50/60HZ, 1 Stage/3 PHASES
Shipping Ability 1400KGS/H 2500KGS/H

Element-three
Nipple Consuming method Contains drinking water pipe, regulator, nipple drinker, drip cup, suspension line, entrance component, midcator and other individuals.

 

Part-four
Local weather Manage System Include the tunnel followers, air inlet, cooling pad & tunnel door.

1-Tunnel Supporters
    
Functionality

Supporter Model Static Pressure Air Circulation Motor
  Pa In.H2O Mthree/H CFM Voltage(V) Frequency(HZ) Phases
54in Fiberglass Cone Admirer 55000 32600 220v-380v fifty/60 1 or three
twelve.five .05 53100 31300 220v-380v 50/60 1 or three
twenty five .one 50800 29900 220v-380v 50/60 1 or 3
50in Galvanized Cone Enthusiast 49530 28465 220v-380v fifty/60 1 or three
12.5 .05 40194 23100 220v-380v 50/60 1 or three
twenty five .1 37236 21400 220v-380v 50/sixty one or three

 

2-Curved Air Inler
    
Overall performance
 

Static Pressure Air Circulation Air Inlet
Pa In. H2O Mthree/H CFM Size(mm)
12 .05 4050  2383 1100*330
25 .one 1980 1165 1100*330

three-Evaporative Cooling Program
  

4-Tunnel Doorway System
 

a-Particular selects panel content for greater insulation in different climate conditions

b-Modular panel layout makes it possible for optimum versatility in doorway dimensions to match home sidewall openings

c-Far better mixing the refreshing chilly air and very hot air prevent the hen flock away from the cold pressure.

d-No far more lifeless zone at side and end walls

e-Far better CZPT the air stream to the center of the roof

f-Automated managed the opening size by the controller in different hen age.

Portion-five
Controller & Control Panel

The ventilation handle program is made up of computerized controller, tempreture sensors, humidity sensors, negtive pressure sensor and alarm method.By implies of the sensors and preset tempreturers, humidity, and unfavorable force, the controller can control tempratures, moisture, wind velocity and unfavorable stress in the property.

Hi-hope management panel select the globe leading manufacturer digital elements Schneider, siemens & ABB to enure security of the rooster farm.

Part-6
Lighting System-Dimmable

Portion-seven
Heating technique-LB White& Damly Brooder and area heater

Element-8
Automatict egg collection system & Manual egg assortment nest

Galvanized materials for egg nest.

Portion-9
Plastic slat for femal spot

We pick raw material with higher quality and lengthy service daily life.

 

Packaging & Transport

All the merchandise provided by Hi-hope are packed with the export common deals and suited for lone distance CZPT transportation.


 

Following Product sales Provider

 

Hello-hope have an experienced soon after-sales team with twenty many years already. And we have a specially-assigned folks orgnised all the queries suggestions by our valued clients. We will give a fast react inside of 24 hours with your difficulties.

 

Our Benefits

Hi-Hope could provide you 1 end provider consist of:

one-Farm Design Consulting
two-Farm Layout/Design and style
three-Turnkey Design-Develop
4-Steel Constructing Deals
5-Poultry Products Deals
6-Design Supervision
seven-Development Management Services ( Just for Philippines and Indonesia Marketplace)
8-Bio Security Services
nine-Natural and organic Fertilizer/Hen Manure Treatment
10-Feed Processing Amenities & Properties

For Much more Specifics, Welcome to Talk with Electronic mail.Many thanks!
                                    
                                      We Treatment A lot more of Your Hen!

 

 

US $20
/ Meter
|
50 Meters

(Min. Order)

###

Type: Breeder Farm Equipment
Usage: Chicken Egg
Application: Chicken
Power Source: Electric
Heating and Ventilation Equipment Type: Hot Blast Stove
Epidemic Prevention Equipment: Mobile Vaccination Car

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Feed Fill System 75mm 90mm
Max Delivery Length 60m 40m
Gear Motor 1.1HP/1.5HP,50/60HZ, 1 PHASE/3 PHASES 1.1HP/1.5HP,50/60HZ, 1 PHASE/3 PHASES
Delivery Capacity 1400KGS/H 2500KGS/H

###

Fan Model Static Pressure Air Flow Motor
  Pa In.H2O M3/H CFM Voltage(V) Frequency(HZ) Phases
54in Fiberglass Cone Fan 0 0 55000 32600 220v-380v 50/60 1 or 3
12.5 0.05 53100 31300 220v-380v 50/60 1 or 3
25 0.1 50800 29900 220v-380v 50/60 1 or 3
50in Galvanized Cone Fan 0 0 49530 28465 220v-380v 50/60 1 or 3
12.5 0.05 40194 23100 220v-380v 50/60 1 or 3
25 0.1 37236 21400 220v-380v 50/60 1 or 3

###

Static Pressure Air Flow Air Inlet
Pa In. H2O M3/H CFM Size(mm)
12 0.05 4050  2383 1100*330
25 0.1 1980 1165 1100*330
US $20
/ Meter
|
50 Meters

(Min. Order)

###

Type: Breeder Farm Equipment
Usage: Chicken Egg
Application: Chicken
Power Source: Electric
Heating and Ventilation Equipment Type: Hot Blast Stove
Epidemic Prevention Equipment: Mobile Vaccination Car

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Feed Fill System 75mm 90mm
Max Delivery Length 60m 40m
Gear Motor 1.1HP/1.5HP,50/60HZ, 1 PHASE/3 PHASES 1.1HP/1.5HP,50/60HZ, 1 PHASE/3 PHASES
Delivery Capacity 1400KGS/H 2500KGS/H

###

Fan Model Static Pressure Air Flow Motor
  Pa In.H2O M3/H CFM Voltage(V) Frequency(HZ) Phases
54in Fiberglass Cone Fan 0 0 55000 32600 220v-380v 50/60 1 or 3
12.5 0.05 53100 31300 220v-380v 50/60 1 or 3
25 0.1 50800 29900 220v-380v 50/60 1 or 3
50in Galvanized Cone Fan 0 0 49530 28465 220v-380v 50/60 1 or 3
12.5 0.05 40194 23100 220v-380v 50/60 1 or 3
25 0.1 37236 21400 220v-380v 50/60 1 or 3

###

Static Pressure Air Flow Air Inlet
Pa In. H2O M3/H CFM Size(mm)
12 0.05 4050  2383 1100*330
25 0.1 1980 1165 1100*330

buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.
chain

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.
chain

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

China High Quality Breeder Farm Feeder Trough Chain and Drinking System     bush roller chain driveChina High Quality Breeder Farm Feeder Trough Chain and Drinking System     bush roller chain drive
editor by czh 2022-12-26